Introduction
Developed based on Sony A7R camera core, MapCam-I 36.4MP camera is very suitable for high accuracy mapping & survey missions.
Its full-frame sensor guarantees superior image resolution for a drone survey camera; meanwhile, a low distortion lens ensures the best reconstruction results.Together with the integrated PPK module, MapCam-I provides you with data accuracy down to 1cm.
Lightweight and compact
MapCam-I mapping camera weighs as little as 330g to help you meet your payload weight allowance.
Easy to use
The parameter setting of MapCam-I has been configured for your mapping usage.
Then only two more steps are needed to make it work. Step 1: assign one PWM signal from your flight controller for the camera shutter trigger. Step 2: power it on.
RTK/PPK system
For high accuracy mapping tasks, MapCam-I works with Emlid Reach RTK/PPK system to offer you data accuracy down to 1cm.
Compatible VTOL drones
MapCam-I mapping camera is compatible with these VTOL fixed-wing platforms: Mapird, FW-250 and FW-320.
Video
Specification
MapCam-I
| Sensor | 35mm full-frame Exmor CMOS sensor(35.9x24mm) |
| Number of Pixels(effective) | 36.4MP |
| Lens compatibility | E-mount lenses |
| Lens option | 35mm by default, 25mm/40mm optional. |
| Hot Shoe signal | Supported (already connected with PPK air unit) |
| Shutter Trigger | PWM signal (5-5.8V) |
| Shutter Speed | 30-1/8000sec |
| Continuous shooting | 4FPS |
| Storage Card Type | SD/SDHC/SDXC Card/MS |
| Storage | SD Card (maximum support 640G) |
| Parameter Setting | Button/USB (already configured) |
| Data Reading | SD card/USB |
| Size | 130 x 100 x 73mm (with damping holder) |
| Power | 7.4-8.4V |
| Weight | 330g (camera & PPK air unit) 370g (camera & PPK air unit & damping holder) |
RTK/PPK Base Station
| Mechanical | |
| Size | 145 x 145 x 85 mm |
| Weight | 690 g |
| Operating temperature | -20ºC ~ +65ºC |
| Ingress protection | IP67 (water and dustproof) |
| Electrical | |
| Battery life | 30 hours |
| Charging port | MicroUSB 5V |
| External power input | 6-40V |
| Certifications | FCC, CE |
| Positioning | |
| Static horizontal | 5 mm + 1 ppm |
| Static vertical | 10 mm + 2 ppm |
| Kinematic horizontal | 7 mm + 1 ppm |
| Kinematic vertical | 14 mm + 2 ppm |
| Connectivity | |
| Radio | LoRa 868/915 MHz |
| Wi-Fi | 802.11b/g/n |
| Bluetooth | 4.0/2.1 EDR |
| Interfaces | USB, RS232, PPS, Event |
| Data | |
| Internal storage | 8 GB |
| Correction input | RTCM2, RTCM3 |
| Solution output | NMEA, ERB, plain text |
| Logs | RINEX2.X, RINEX3.X |
| GNSS | |
| Signals | GPS/QZSS L1, GLONASS G1, BeiDou B1, Galileo E1, SBAS |
| Tracking channels | 72 |
| IMU | 9DOF |
| Update rate | 14 Hz / 5 Hz |
Your Purchase Includes
Without RTK/PPK System Version
1 x YANGDA MapCam-I mapping camera
1 x Damping holder
With RTK/PPK System Version
1 x YANGDA MapCam-I mapping camera
1 x Damping holder
1 x RTK/PPK air unit
1 x RTK/PPK base station
Product Photos
