전파인증획득
자사 전파인증번호 : MSIP-CRI-eRC-TaranisX9DPLUS
자사 전파인증번호 : MSIP-CRI-eRC-X8R
Description:
Brand name: Frsky
Item name: Taranis X9D Plus with X8R receiver
Channels: up to 16 channels
Battery capacity: 2000mAh
Operating voltage: 6-15V( 2S 3S lipo are acceptable)
Operating current: 270mah maximum
Operating temperature: -10 - 60 degree
Backlight LCD screen: 212*64, 2 color combinations for select,send randomly
Model memories: 60(extendable by SD card)
Compatibility: FrSky x series an V8-II series receiver
What is upgraded compared to the X9D
1.Noise reduction
2.Vibration alerts
3.backlit LCD
4.2000mah battery
Features:
1.Up to 16 channels
2.Four ball bearing gimbals
3. Two-module two-frequency system
4.Three selectable modes
5.2 color backlit LCD selectable(blue&white,Orange&white) send randomly
6.Upgrade the firmware by using SD card directly,no need to install any driver
7.Smart port supported,USB,Haptic
8.Receiver match,RSSI(Receiver signal strength)
9.Audio speech output(values,alarms,settings,etc)
10.Real time flight data logging
11.Vibration alerts
Notice:
the SWR function is not used to Taranis X9D Plus.
White box package
English Manual,Please Click Here!
Package Included:
1 x FrSky 2.4G ACCST Taranis X9D Plus Transmitter(white box package)
1 x X8R receiver
1 x 2000mah battery
1 x Charger
1 x manual
전파인증번호 : R-REI-eRC-Pixhawk2
픽스호크 2 사용 메뉴얼
http://www.hex.aero/wp-content/uploads/2016/09/PIXHAWK2-Assembly-Guide.pdf
http://www.hex.aero/wp-content/uploads/2016/07/DRS_Pixhawk-2-17th-march-2016.pdf
http://www.hex.aero/wp-content/uploads/2017/03/Here-Usage-Instruction.pdf
PIXHAWK 2
World's most advanced autopilot for open autonomous unmanned vehicles. Redundant, temperature controlled, isolated. Greatly improved from the previous version Pixhawk in all aspects.
- Modular design with total flexibilty on connectivity
- Increased reliability and reduced integration complexity
- Comes 100% GPS RTK ready. Multiple GPS capability is standard
- Pixhawk 2 has a total of 29 MEMS sensors in it
- 3 x 3-axis Accelerometers
- 3 x 3-axis Gyroscopes
- 3 x 3-axis Magnetometers
- 2 x Barometers
Connectivity:
- 5 serial ports
- 2 CAN ports
- 2 I2C ports
- 2 Power ports
- 1 ADC port
- 8 dedicated opto capable PWM out
- 6 GPIO which can also be used for PWM
- Dedicated Spektrum RX port
- S.Bus in and out, PPM in
Key design points:
1. Separate Cube with carrier board. Let's users develop their own carrier boards.
2. Robust interface connectors to make it easy to plug and safer during flight/operation
3. Airframes VTOL, plane, multicopter, traditional helicopter, rover, boat, submarine, general robotics
4. Heating system to assure reliability in low temperatures
5. 3 redundant IMU and up to 3 redundant GPS to make it safer
6. Fully support Intel Edison module
7. Standard power brick included with the full kit
- Modular Cube design
- Dampened IMU
- 3 x redundancy IMU
- Supports Fixed Wings, Multicopters, VTOLs, ROVs, Rovers.
- CM level GPS
- Multiple GPS system
- Open development environnement
Parts included:
Pixhawk 2 Cube and Carrier board
Buzzer
Safety switch
Power unit
Cables (Micro USB, specific DH13 and JH-GST cables)
DF13 splitter
SD Card adapter
Mounting foam
에디슨 캐리어 보드가 포함되어 있지 않습니다.