※ 본 상품은 해외구매대행 상품으로 배송기간이 (약 3일~5일)정도 소요될 예정입니다.
The discharger is not only for DJI Phantom 2 3, inspire 1 battery, it is also applied for a variety of model aircraft batteries , can also works as the phone charger, Lightweight and convenient, stable performance, your first choice for discharger.
Discharge Plate Parameters
1 - 6s discharge panel can use for 1 - 6s battery discharge, discharge cut-off voltage of 3.8v, the actual discharge process will be closed at approximately 3.8v. Optional discharge current discharge panel is 1A and 2A, but if less than 3s battery, we recommend 1A battery discharge.
Discharge Panel LED Display Instruction
There are 4 display LEDs in the panel, when connect battery to the panel, the board can identify your battery automatically, it can tell your battery in 2s, 3s or 6s...
According to the corresponding battery after testing has been completed by the current voltage LED display range which, when four LED full brightness, the average S battery voltage is 4.2V and above, that is, the battery is at 100%, the discharge plate set when per S battery voltage is less than or equal to 3.8V when the battery is 0%, then stop discharging. Between 4.2V and 3.8V battery power divided by average LED display, descending to 100%, 75%, 50%, 25%, 0%. When the discharge to 0% of the time, 4 LED full flashes
It Can Act As Mobile Power
Discharge board with a USB port, the USB ports can charge their cell phones. In using the USB port to charge the phone, please remove the load plate. Please note when charging the phone mode, the battery will keep discharging to charge the phone, and won’t be limited by the 3.8V cut-off voltage!
Package includes:
- discharger x 1
Note: the battery is not included in the package!
