판매가 | 19800 |
---|---|
할인판매가 | 19,800원 100% |
할인금액 | 총 할인금액 원 (모바일할인금액 원) |
적립금 |
200원(1.00%) 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % |
상품코드 | P0000FAG |
배송방법 | 택배 |
배송비 | 3,500원 (50,000원 이상 구매 시 무료) |
배송 | |
---|---|
수량 |
상품 정보 | 가격 | 삭제 |
---|---|---|
총상품금액(수량) 0 |
DYS Power Distribution Board w/Dual BEC(5V/12V)
DYS사의 5V, 12V 레귤레이터가 내장된 파워 디스트리뷰션 보드.
Basic parameter of the power distribution
board:
Assembling hole:45X45MM
Thickness of copper-coated:
4OZ
Discharge capacity of motor circuit:6S 120A
Output power for module
5V: 15W
Output power for variable voltage 10-20V: 36W
<제품 이미지>
제품은 아래 사진과 같이 레귤레이터가 PCB 센터에 붙어 있습니다., 니퍼 등으로 분리 해 줍니다.
전원 보드는 아래 보드에 보이는 것 처럼 +/-가 표시되어 있습니다. 솔더링시 극성이 바뀌지 않도록 주의해서 솔더링합니다.
파워 라인은 최대 옥토까지 배선이 가능하며, PMU 및 기타 LED 등을 위한 외부 배선용 포트 4개가 추가로 설치되어 있습니다.
레귤레이터는 솔더링 하기전에 먼저 변속기에서 오는 파워라인을 솔더링 후에 레귤레이터를 붙입니다.
12V 레귤레이터는 다이얼 노브를 이용해서 12V~20V까지 전압 조절이 가능합니다.
멀티 테스터 등을 이용해서 원하는 전압에 맞춘 후 사용합니다.(최대 36W/3A)
5V 레귤레이터는 15W출력으로 3A까지 지원합니다.
레귤레이터 장착 완료사진.
뒷면의 솔더링 포인트를 확인하신 후 솔더링 하시기 바랍니다.
아래 사진에 보듯이 각각의 레귤레이터는 정해진 위치에 핀이 딱 맞게 설계되어 있습니다. 정확한 위치에 솔더링 하도록 합니다.
Mark 1 and Mark 2 both are the power input(VIN/VOUT
is positive, GND is negative).
Mark 3 is regulated voltage output for 5V(
label 5V is positive, GND is negative, which can output 4 channels power at the
same time).
Mark 4 is adjustable voltage output for 10V-20V(label 10V is
positive, GND is negative, which can output 4 channels power at the same
time).
Mark 5 is the power output, it is to connect ESC or other equipments,
each solderred pad has the screen printing label “ +/- ”, label “ + ” is
positive, label “ - ” is negative.
Note: The LED of the main board need to be
supported by module 5V, it will be lit after finished assembled.